Q200 – Particle Count
Particle Counter, Wear Particle Classifier, Ferrous Monitor
Application: Machine Condition Based Monitoring
The Spectro LNF Q200 series features LaserNetFines™, the world’s best particle counter technology. With an intuitive, configurable GUI and no calibration required, the Q200 series is fast, accurate and easy to use.
Sample preparation is efficient with the LNF. Viscosities up to 320cSt can be processed without dilution due to the wide dynamic range. And unlike conventional light blockage particle counters, there are no flow control valves that need adjusting when testing different sample viscosities.
The advanced design makes it much more than just a particle counter: The LNF also calculates free water in ppm, and differentiates contaminants. Several models are available providing particle counts and codes, abnormal wear classification and ferrous wear measurement.
Features & Benefits
- ASTM D7596 – Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
- Particle Count for all particles >4 μm to 100 μm
- Highest saturation limit, up to 5,000,000 particles/ml with a coincidence error <2%
- Viscosity range ISO15 to ISO320, undiluted
- Images through dark fluids containing up to 2% soot with automatic laser gain control
- Error corrections for water and air bubbles
- Particle counts and codes per ISO 4406, NAS 1638, NAVAIR 01-1A-17, SAE AS 4059, GOST, STM D6786, HAL, and User defined bins.
- Export formats include SpectroTrack and AMS Machinery Health Manager
- Ferrous Monitor to measure ferrous content.
- Ferrous wear measurement is a critical requirement for monitoring machine condition. The high sensitivity magnetometer measures and reports ferrous content in ppm/ml, and provides ferrous particle count and size distribution for large ferrous particles.
- The in-line design of the magnetometer with the LNF flow cell enables measurement of both ferrous content and total particle count on the same sample, eliminating the need to measure Ferrous content on another instrument.
Classification of wear particle shape
The Q200 directly images wear particle silhouettes, and counts and classifies wear particles over 20 microns as cutting wear, sliding wear, fatigue wear, nonmetallic or fibers. This allows operators to determine the type of wear debris, wear mode and potential source from internal machinery components
AutoSampler for high throughput sample processing
The Autosampler is a low cost solution for automatic and unattended processing of a batch of up to 24 samples. The Autosampler may be added to existing LNF installations by the end user with minimal setup
- SpectroLNF- Q210: LNF Particle counter.
- SpectroLNF -Q220: LNF Particle counter with wear particle shape classifier.
- SpectroLNF- Q230: LNF Particle counter, automatic shape classifier, and ferrous monitoring with a magnetometer.
Analytical Tests and Features by model:
|Total particle count & codes||v||v||v|
|Non-metallic particles (sand/dirt)-quantity||v||v||v|
|Free water measurement||v||v||v|
|Air bubble/water droplet correction||v||v||v|
|Wear particle classification||v||v|
|Ferrous content, ppm||v|
|Fe particle count & size distribution||v|
|Auto sampler option||v||v||v|
Resources & Downloads
- Q200 Datasheet
- Whitepaper: Dynamic Equilibrium Condition (DEC)
- Whitepaper: LNF Overview
- Total Ferrous Measurement Application Note
- Whitepaper: Particle Counters for Oil Analysis: Design & Specifications
- Article: LNF Particle Count – How Low Can You Go
- Article: LaserNet Fines® Q230 Technology
35.6 cm (H) x 36.8 cm (W) x 78.7 cm (L)
(14 in x 14.5 in x 31 in)
Photos & Video