LPG

HK-0221 Pressure Hydrometer Apparatus

HK-0221 Pressure Hydrometer Apparatus conforms to the ASTM D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, is used for testing the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325 kPa (14.696 psi).

Technical parameters

1.Working pressure:1.2MPa

2.Inlet and outlet mouth diameter:6mm

3.Pressure cylinder diameter:51mm, thickness: 6.5mm

4.Length of the cylinder:445mm

5.Ambient requirements:Temperature 10~40°C; Humidity≤85%

HK-0221A Pressure Hydrometer Apparatus Bath

HK-  0221A Pressure Hydrometer Apparatus bath conforms to the ASTM D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, is used for testing the density or relative density of light hydrocarbons including liquefied petroleum gases (LPG) having Reid vapor pressures exceeding 101.325 kPa (14.696 psi).

Technical parameters

1.Rated voltage:AC220V±10% 50Hz or 110V±10% 60Hz

2.Power:1500W

3.Temperature controlling mode:Digital display

4.Temperature controlling range:10~25℃

5.Temperature controlling precision:±0.1℃

6.Stirrng mode:Pump loop

7.Ambient requirements:Temperature:10~40℃;Humidity≤85%

HK-0232 LPG Copper Strip Corrosion Test Water Bath

HK-0232 LPG Copper Strip Corrosion Test Water Bath conforms to the ASTM D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases.

 

Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment.

 

This apparatus covers the detection of the presence of components in liquefied petroleum gases which can be corrosiveto copper.

Technical parameters

1.Rated voltage:AC 220V±10% 50Hz or 110V±10% 60Hz

2.Power:2000W

3.Temperature:Digital display temperature controller

4.Temperature range:Room temperature ~ 90°C

5.Control precision:±0.5°C

6.Temperature sensor:Pt100 (Platinum resistor)

7.Bath holes:Two

8.Mixing method:Motor stirring

9.Ambient requirements:Temperature 10~40°C; Humidity≤85%

HK-0125 LPG Hydrogen Sulfide Analyzer (Lead Acetate Method)

HK-0125 LPG Hydrogen Sulfide Analyzer (Lead Acetate Method) measures absolute viscosity of viscosity graded paving bitumen (IS: 73: 2006) at 60 C in accordance with IS: 1206 (Part II) (similar to ASTM D 2171), which uses a vacuum capillary viscometer. It should be noted that any other viscometer such as rotational viscometer.

 

Cannot be used to measure the absolute viscosity at 60 C since the bitumen in nonNewtonian in nature at this temperature. While obtaining quotations specify the following requirements.

 

Although Asphalt Institute vacuum viscometer and Modified Koppers vacuum viscometer can also be used, the following refers to Cannon-Manning vacuum viscometer only.

Technical Parameters

1.Power supply: AC 220V± 10%, 50 Hz;

2.Heating power: Two grades; 1000 W for auxiliary heating and 600 W for temperature controlling;

3.Bath temperature: Ambient temperature~180.0° C;

4.Temperature controlling accuracy: ± 0.1° C;

5.Mercury thermometers

6.Bath cubage: Not less than 23 L;

7.Sample quantity: 3 piece at the same time;

8.Stirring motor: 6 W, 1200 RPM;

9.Ambient temperature: -10° C~+35° C;

10.Relative humidity: <85%;

11. emperature sensor: Industrial platinum resistance, Pt100;

12.Total Power consumption: Not more than 1800 W.

13.Capillary viscometer: 7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes.

HK-6602 Apparatus for determination of vapor pressure for liquefied petroleum gases (LPG method)

HK-6602 apparatus for determination of vapor pressure for liquefied petroleum gases conforms to ASTM D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method).

 

The apparatus is used for testing the gage vapor pressures of liquefied petroleum gas products (Warning—Flammable gas. Harmful when inhaled.) at temperatures of 37.8°C (100°F) up to and including a test temperature of 70°C (158°F).

Technical parameters

1.Rated voltage:AC220V±10% 50Hz

2.Heating power:2000W

3.Temperature controlling mode:digital display

4.Temperature controlling range:room temperature~90℃

5.Temperature controlling precision:±0.1℃

6.Testing bomb:2 bombs

7.Stirring mode:pump loop

8.Ambient requirements:Temperature:10~40℃;Humidity≤85%

HK-6602 Apparatus for Determination of Vapor Pressure for Liquefied Petroleum Gases (LPG method)

HK-6602 apparatus for determination of vapor pressure for liquefied petroleum gases conforms to ASTM D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method).

 

The apparatus is used for testing the gage vapor pressures of liquefied petroleum gas products (Warning—Flammable gas. Harmful when inhaled.) at temperatures of 37.8°C (100°F) up to and including a test temperature of 70°C (158°F).

Technical parameters

1.Rated voltage:AC220V±10% 50Hz

2.Heating power:2000W

3.Temperature controlling mode:digital display

4.Temperature controlling range:room temperature~90℃

5.Temperature controlling precision:±0.1℃

6.Testing bomb:2 bombs

7.Stirring mode:pump loop

8.Ambient requirements:Temperature:10~40℃;Humidity≤85%