Gum Analysis
HK-8019A Air Method Existent Gum Content Apparatus(3 holes), conforms to ASTM D381 standard.
It is used to test existent gum content of aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form, (including those containing alcohol and ether type oxygenates and deposit control additives)
HK-8019: equips with 3 holes
HK-8019A: equips with 5 holes
Technical parameters
1.Rated voltage: AC 220V±10% 50Hz
2.Power: 2000W
3.Temperature controlling method: Digital display temperature controller
4.Evaporation bath temperature: 160~165 °C
5.Temperature controlling point: 162 °C
6.Temperature accuracy: ± 2 °C 7.Temperature sensor: Pt100 (Platinum resistor)
8.Metal bath Holes: Three holes
9.Air flow: 1000±150ml/s
HK-8019C Existent Gum Tester for Fuel (Air jet evaporation method) is suitable to the standards of GB/T8019 and ASTM D381.
It is apply to test the existent gum of jet fuel, motor gasoline and other volatile distillates including the products containing alcohol, ethers oxygenated chemicals and sediment inhibit additives.
HK-8019B:equips with 3 holes
HK-8019C:equips with 5 holes
Technical Parameters
1.Rated voltage:AC220V±10% 50Hz
2.Power of main engine: 2000W
3.Power of steam generator: 0~5000W
4.Temperature controlling method: Digital display
5.Evaporation bath temperature:232~246°C
6.Hole of metal bath:3 holes or 5 holes
7.Air flow rate:1000±150ml/s
HK-8019D(HK-8019E) Existent Gum Bath is suitable to the standards of ASTM D381.
It is apply to test the existent gum of jet fuel, motor gasoline and other volatile distillates including the products containing alcohol, ethers oxygenated chemicals and sediment inhibit additives.
This apparatus covers the determination of the existent gum content of aviation fuels, and the gum content of motor gasolines or other volatile distillates in their finished form,(including those containing alcohol and ether type oxygenates and deposit control additives)
HK-8019D:equips with 3 holes
HK-8019E:equips with 5 holes
Technical Parameters
1.Rated voltage:AC220V±10% 50Hz
2.Power of main engine: 2000W
3.Power of steam generator: 0~5000W
4.Temperature controlling method: Digital display
5.Evaporation bath temperature:232~246°C
6.Hole of metal bath:3 holes or 5 holes
7.Air flow rate:1000±150ml/s
8.Ambient requirement: Temperature:10~40°C; Humidity≤85%