Corrosion Analysis
HK-0023 Copper strip & silver strip corrosion tester for petroleum products is suitable to the standards of ASTM D130A and IP227.
It can test the resistance to the copper corrosion of aviation gasoline, jet fuel, motor gasoline, natural gas and other products RVP of which RVP is not higher than 124kPa. It can test corrosion tendency of silver component of jet fuel for aviation turbine engine fuel system.
Technical parameters
1.Rated voltage: AC 220V±10% 50Hz
2.Power:1500W
3.Temperature control:Digital display temperature control
4.Temperature range:Room temperature~100°C
5.Temperature accuracy:±0.5°C
6.Temperature sensor:Pt100 (Platinum resistor)
7.Slot holes:Four holes
8.Mixing method:Mixing motor, 1200r/min
9.Ambient requirements:Temperature: 10~40°C;Humidity≤85%
K-0023B sliver strip corrosion bath for Aviation Turbine conforms to the IP227 and ASTM D7671 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method.
This apparatus are capable for testing 8 samples in the same time, especially suitable for when airport oil depot receive oil, user needs to conduct few experiments in a short time.
Technical parameters
1.Rated voltage ：AC220V±10% 50Hz
2.Power：2000W
3.Test station: eight
4.Temperature control point:50℃
5.Print method：thermal printer
6.Temperature control accuracy：±0.5℃
7.Ambient requirements：Temperature10～40℃ ; Humidity≤85%
HK-5096-1 Copper Test Strip Polisher confroms to ASTM D130 and SH/T0023 standard, it is used for petroleum products copper strip and silver strip.
It features autorotation automatically and it is equiped with cleaning device so as to make it convenient to polishing
Technical Parameters
1.Rated Voltage：AC 220±10% 50Hz
2.Power：340W
3.Stirring speed：0~8000r/min
4.Holder material：Organic Glass
5.Polishing area：Φ100mm
6.Ambient requirement：Temperature 10~40℃；Humidity≤85%
HK-5096C Copper Strip Tarnish Test Apparatus conforms to the ASTM D130 standard the apparatus can determinate of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil,and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa (18 psi) at 37.8°C (930mmHg).
It is a good laboratory special-purpose instrument in petroleum chemical industry, transportation, scientific research colleges and universities.
Technical parameters
1. Rated voltage: AC 220V±10% 50Hz
2. Power: 1800W
3. Precision of control: ±0.5℃
4. Ambient temperature:Temperature:10～40℃;Humidity≤85%
HK-5096D Copper Strip Corrosion Tester for Petroleum Products (Patent product) conforms to ASTM D130Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test and ASTM D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease.
It can test the resistance to the copper corrosion of aviation gasoline, jet fuel, motor gasoline, natural gas and other HC of which RVP is not higher than 124KPA, megilp, diesel, kerosene, distillate fuel oil, lubricating oil and lubricating grease.
Technical Parameters
1. Rated Voltage: 220V±10％ 50HZ
2. Power: 1800W
3. Temperature control mode: High precision PID digital display temperature controller
4. Temperature control range: Room temperature～200℃
5. Temperature control accuracy: ±0.1℃
6. Operation mode: Touch screen, display the color scale, auto timing
7. Storage mode: Big Storage, can store thousands of data
8. Metal bath: All cast aluminum design, 8 test holes
9. Shell: Surface electrostatic spray, thickness＞1.2mm
10. Printing method: Needle printer
11.Ambient requirement: Temperature:0～50℃; Humidity≤85%
12.Noise: ＜30 dB
13.Volume: (LWH) 400×550×830 (mm) Weight:40 (kg)