Carbon Residue Analysis

Home>Carbon Residue Analysis
HK-268 Conradson Carbon Residue Apparatus

 HK-268 Conradson Carbon Residue Apparatus conforms to the ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products.

 

This apparatus covers the determination of the amount of carbon residue left after evaporation and pyrolysis of an oil, and is intended to provide some indication of relative coke-forming propensities.

 

This test method is generally applicable to relatively nonvolatile petroleum products which partially decompose on distillation at atmospheric pressure, our HK-268 Provides an indication of relative coke forming properties of petroleum oils. The residue remaining after a specified period of evaporation and pyrolysis is calculated as a percentage of the original sample .

Technical parameters

1.Blowtorch: Mig kerosene blowtorch, aperture Φ25mm

2.Cover flame body: Back cut diameter 90±2mm End opening diameter 82±2mm

3.Round iron shield: Φ125±5mm

4.Porcelain crucible: 30ml±1ml

5.Internal iron crucible: Φ55±2mm

6.External iron crucible: Φ80±2mm

HK-0170 Ramsbottom Carbon Residue Apparatus (Electric Furnace method)

HK-0170 Ramsbottom Carbon Residue Apparatus conforms to the ASTM D524 Standard for Ramsbottom Carbon Residue of Petroleum Products.

 

It is used for testing the amount of carbon residue left after evaporation and pyrolysis of an oil, and it is intended to provide some indication of relative coke-forming propensity.

 

This test method is generally applicable to relatively nonvolatile petroleum products which partially decompose on distillation at atmospheric pressure.

Technical parameters

1.Rated voltage: AC 220V±10%; 50Hz

2.Heating power: 2000W

3.Temperature controlling mode: Digital display

4.Temperature control point: 520°C±5°C

5.Sensor: Pt100 (platinum resistor)

6.Bath holes: Four holes

7.Ambient requirements: Temperature 10~40°C; Humidity≤85%

HK-17144 Micro Carbon Residue Apparatus

HK-17144 Micro Carbon Residue Apparatus conforms to theASTM D4530 Standard Test Method for Determination of Carbon Residue (Micro Method).

 

This tester covers the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials.

Technical parameters

1.Rated voltage: AC 220V±10%   50Hz

2.Heating power: 1500W

3.Coking oven: 500℃

4.Temperature control accuracy ±2℃

5.Test holes:12

6.Flow adjustment range:100ml~1000ml;150ml/min and 600ml/min automatic switch

7.Ambient requirement:Temperature: 5~40℃  Humidity≤85%