Lubricating Oil Evaporation Loss

HK-0059 Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test)

HK-0059 Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test) conforms to the ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method, Procedure A.

 

The evaporation loss is of particular importance in engine lubrication. Where high temperatures occur, portions of an oil can evaporate

Technical Parameters

1.Rated voltage:AC220V±10%  50Hz

2.Power:1300W

3.Temperature control method: LCD display

4.Voltage regulate:Precise needle valve

5.Temperature control point:250±0.5℃

6.Pressure display:Inclined manometer

7.Ambient requirements:Temperature 10~40℃ Humidity≤85%

HK-0059A Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test)

HK-0059A Lubricating Oil Evaporation Loss Tester (NOACK Volatility Test) conforms to the ASTM D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method, Procedure A.

 

The evaporation loss is of particular importance in engine lubrication. Where high temperatures occur, portions of an oil can evaporate.

Technical  parameters

1.Rated voltage:AC220V±10%  50Hz

2.Power:1300W

3.Temperature control method: LCD display

4.Voltage regulate: Precise needle valve

5.Temperature control point:250±0.5℃

6.Pressure display:Inclined manometer

7.Ambient requirements:Temperature 10~40℃ humidity≤85%

HK-7325 Evaporation Loss Test Apparatus for Lubricating Grease

HK-7325 conforms to ASTM D972 and ASTM D2595.

 

It is suitable for the test of the evaporation losses of the lubricating oil and lubricating grease. The evaporation loss is an important factor when using these lubricants. The evaporation loss can be tested at any agreed upon temperature between 100 and 150°C (210 to 300°F).

Technical Parameter

1.Rated voltage: AC220V±10%  50Hz

2.Power: 2000

3.Temperature control range: Room Temperature~220℃, ±0.2℃

4.Temperature control mode

5.Motor stirring: 1450r/min

6.Bath holes: 2

7.Timer: Digital timer, 0.01s~99.99h

8.Flow control: 2L/min

9.Evaporator: 304 Stainless Steel

10.Coiler: Tinned red copper

11.Noise: <47dB

12.Volume: LWH: 380*460*630Weight: 25kg

13.Ambient requirement: Temperature: 10~40℃ ;Humidity≤85%