Dropping Point Apparatus

HK-3498 High Temperature Dropping Point Apparatus

HK-3498 High Temperature Dropping Point Apparatus conforms to the ASTM D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range.

 

This apparatus covers the determination of the dropping point of lubricating grease and it test dropping points of lubricating greases at temperatures of up to 400°C

 

The apparatus is used for testing the gage vapor pressures of liquefied petroleum gas products (Warning—Flammable gas. Harmful when inhaled.) at temperatures of 37.8°C (100°F) up to and including a test temperature of 70°C (158°F).

Technical parameters

1.Rated voltage:AC220V±10% 50Hz

2.Power:750W

3.Temperature control mode:Digital display temperature controller

4.Test holes:Six

5.Light:220V 8W

6.Ambient requirements:Temperature 10~40°C; Humidity≤85%

HK-3498A Automatic High Temperature Dropping Point Apparatus

HK-3498A  Automatic High Temperature Dropping Point Apparatus conforms to the ASTM D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range.

 

This apparatus covers the determination of the dropping point of lubricating grease and it tests dropping points of lubricating greases at temperatures of up to 400°C

Technical parameter

1.Power source:AC 220V±10% 50Hz

2.Power:1500W

3.Detecting mode:Infrared scanning

4.Screen :LCD

5.Alarm mode:Audible and visual alarm system

6.Print mode: Thermo printer

7.Ambient requirements: temperature 10~40℃;humidity≤85%

HK-4929 Lubricating Grease Dropping Point Tester

HK-4929 Lubricating grease dropping point tester conforms to the ASTM D566 Standard Test Method for Dropping Point of Lubricating Grease, the apparatus determinates the dropping point of lubricating grease, which is not recommended for use at bath temperatures above 288°C.

 

For higher temperature’s test . our HK-2019(ASTM D 2265) should be used.

Technical parameters

1.Power voltage:AC220V±10%  50Hz

2.Power:0~800W,continuously adjustable

3.Temperature controller method:solid state voltage regulator steplessvoltage regulation.

4.Stirring method:engine stirring 220V,500 r/min

5.Glass bath:800ml

6.Testing holes:double

7.Lighting:LED  light source 220V

8.Ambient requirements:Temperature : 10~40℃  humidity≤85%